BCM and module work
Correct BCM programming on a Rogue, Altima or Q50 takes Nissan-specific software and a proper key and immobilizer sync. That is the standard on every job.
NASTF Certified Professional
BCM Programming Services in Atlanta
When a Nissan or Infiniti body control module needs programming, cloning or NATS synchronization, KeyModuleProgramm comes to your vehicle. We're a mobile automotive locksmith carrying dealer-level diagnostic software for on-site work.
- Certified to work on Nissan and Infiniti
- Licensed, bonded and insured
- Same-day on-site service across Metro Atlanta
- Trained specialist, no call center
Call with your VIN and a trained specialist answers directly.
(404) 737-0061What we offer
Modules, Keys and Vehicles We Program
KeyModuleProgramm programs, clones and configures BCMs on Nissan and Infiniti vehicles from 2000 and newer, on site, with the same key and immobilizer tools the brands use.
- Module Configuration with CONSULT III Plus
- BCM/ECM Bench Cloning with VVDI Prog EEPROM reading
- VIN Writing for Used Modules
- NATS Synchronization After Module Replacement
- ECM/TCM Reflash with NERS + J2534
- Key System Error diagnostics with CONSULT
Keys and immobilizer
BCM work often goes hand in hand with keys. Fobs and smart keys are programmed and registered in the same visit.
- Key Registration with CONSULT III Plus
- Intelligent Key (I-Key) Programming
- NATS PIN Code Reading, including the 20-digit rolling PIN (2018+)
- Autel IM608 Pro II and Xhorse VVDI Key Programming
- ESCL Emulator and Steering Lock Replacement
- Emergency Key Blade Cutting
Other services
Transponder Key Programming, Smart Key Replacement, All Keys Lost, Key Cutting Duplication, ECU ECM Programming and Car Lockout, with damage-free entry guaranteed on every lockout.
Nissan models
Model years 2000 and newer, serviced at your location.
- Rogue
- Sentra
- Kicks
- Pathfinder
- Altima
- Frontier
- Versa
- Murano
- Armada
- Ariya
- LEAF
- Z
Infiniti models
Model years 2000 and newer, serviced at your location.
- QX60
- QX80
- QX50
- QX55
- Q50
Call with your model and year, and the specialist confirms the right software and procedure for your module.
(404) 737-0061Dealer-Level Programming at Your Vehicle
You do not bring the car anywhere: the specialist comes to your vehicle with dealer-level diagnostic software and does the programming on site, the same day across Metro Atlanta.
Equipment on board
Professional equipment covers registration, reflashing and bench work in your driveway or parking spot.
BCM sourcing for replacement jobs: we can supply the replacement BCM, or program a new or used one you already have.
- CONSULT III Plus for key registration and module configuration
- Autel IM608 Pro II for key programming
- Xhorse VVDI and VVDI Prog for key programming and EEPROM reading
- NERS + J2534 for ECM/TCM reflash
- Bench cloning of BCM and ECM modules
Call and tell us where the car is parked, and the specialist arrives with the tools your module needs.
(404) 737-0061A Dealer Alternative Without the Tow
For most BCM jobs you can skip the tow and the dealer queue: KeyModuleProgramm does the same dealer-level work at your car, on site and the same day.
- No towing: the programming happens where the vehicle sits
- Same-day service instead of waiting for a dealer appointment
- Used modules accepted, with VIN Writing for Used Modules
- NATS Synchronization After Module Replacement, so the car starts and recognizes your keys
- A trained specialist who answers you directly
Cases that still need a dealer: factory defects covered by the warranty and recalls, which the dealer fixes at no cost to you.
Call before you book a tow, and the specialist tells you if the job can be done on site.
(404) 737-0061Service area
Same-Day Coverage Across Metro Atlanta
KeyModuleProgramm brings BCM programming to you the same day across Metro Atlanta, within 30 miles of Sandy Springs. Urgent jobs are taken during Mon to Sun 9:00 am to 8:00 pm, with fast response.
The service covers Sandy Springs, Atlanta, Roswell, Alpharetta, Dunwoody, Brookhaven, Johns Creek, Milton, Marietta, Smyrna, Kennesaw, Woodstock, Acworth, Chamblee, Doraville, Norcross, Peachtree Corners, Duluth, Suwanee, Tucker, Decatur, Lilburn, Stone Mountain, Clarkston, Mableton, Austell, Powder Springs, East Point, College Park, Hapeville, South Fulton, Stonecrest, Douglasville, Canton, Lawrenceville, Union City, Sugar Hill, Snellville, Buford and Conyers, from a mobile setup that leaves from Sandy Springs, GA 30328.
Neighborhoods we reach
Altima BCM programming, Q50 key programming, Sentra module work and key fob programming are done on site in neighborhoods like these.
- West End
- Ormewood Park
- Cabbagetown
- Midtown
- Buckhead
- Kirkwood
- Grant Park
- Old Fourth Ward
- Virginia Highland
- East Atlanta
- Inman Park
- Reynoldstown
Call with your location, and the specialist confirms your same-day arrival window.
(404) 737-0061Licensed, Bonded, Insured and NASTF Certified
Before anyone works on your body control module, check their credentials. KeyModuleProgramm is licensed, bonded and insured, and holds NASTF Certified Professional status, which unlocks the manufacturer security data that BCM and immobilizer jobs require.
- NASTF Certified Professional
- Licensed, bonded and insured
- Certified to work on Nissan and Infiniti
Ownership is verified on every job with your VIN, a photo ID and your title or registration.
What Sets the Price of BCM Work
The price of BCM programming depends on your vehicle and on the work the module needs. You get the exact figure once the specialist has your model, year and VIN.
- Make, model and year of the vehicle
- Reprogramming your current BCM or replacing it
- Whether a used module needs VIN writing or bench cloning
- Whether keys must be registered or all keys are lost
- Whether ECM or TCM reflashing is needed in the same visit
Call with your model, year and VIN, and the specialist gives you a quote for your exact job.
(404) 737-0061Details to Have Ready
Have your vehicle details and ownership papers ready and you can book BCM programming in a single conversation with the specialist who does the work. There is no call center here.
- Make, model and year of your Nissan or Infiniti
- The VIN
- A photo ID
- Proof that the car is yours: title or registration
- What happened: module replaced, keys lost or a Key System Error on the dash
Call with your model, year and VIN, and the specialist confirms the job and books your same-day visit.
(404) 737-0061FAQ
My Rogue shows Key System Error after a module was swapped. Can you fix it where it is parked?
Yes. The specialist runs Key System Error diagnostics with CONSULT at your vehicle, then performs NATS Synchronization After Module Replacement so the BCM, immobilizer and keys talk to each other again. The work is done on site, the same day across Metro Atlanta.
I bought a used BCM for my Altima. Can you make it work in my car?
In most cases, yes. A used module is adapted with VIN Writing for Used Modules, or your original BCM data is copied through bench cloning with VVDI Prog EEPROM reading. After that the module is synced with NATS so the car starts and accepts your keys.
I lost every key to my Q50 and the BCM needs work too. Can you handle both in one visit?
Yes. All Keys Lost service and BCM programming can be done in the same visit. The specialist reads the NATS PIN code, programs new Intelligent Keys and registers them with CONSULT III Plus. Have your VIN, a photo ID and your title or registration ready.
My Nissan is a 2019. Does the 20-digit rolling PIN mean I have to go to the dealer?
No. NATS PIN Code Reading includes the 20-digit rolling PIN used on 2018+ vehicles. As a NASTF Certified Professional, KeyModuleProgramm has access to the security data needed to program keys and modules on these models at your location.
Can you reflash my ECM or TCM during the same appointment as the BCM?
Yes. ECM/TCM Reflash with NERS + J2534 is part of the mobile setup, so module programming on the BCM, ECM and TCM can be handled in one on-site visit. Mention it when you book so the specialist plans the full job.
My car is older than 2000. Can you still program the BCM on site?
On-site service covers Nissan and Infiniti vehicles from 2000 and newer. For older vehicles: we do not work on them, so we can point you to the right place instead. Share your model and year first and the specialist confirms what is possible.